Gravity Die Casting Machines

Product Code : 04

Product Specification

IHPL is a company specialized in the manufacture of Gravity and Vertical Pressure Die-casting Machines for nonferrous metals like aluminium, lead and copper alloys with wide range of choice in order to meet the needs of foundries, All these machines can solve 80 % of all needs of nonferrous foundries.

The machine is a "C" Frame type well over dimensioned structure, fabricated out of steel plates with one fixed platen and one moving platen guided by four rear guide bars and supported by bottom slides to take heavy die weight. Both platens are provided with core extractor or ejection of the castings. Machines are availble in following configuration.

1. Non Tilting Gravity Die-Casting machine.

a. Manual Control by hold to run type push buttons.
b. Optionally PLC controlled auto cycle.

2. Tilting Gravity Die-Casting Machine.

a. PCL Controlled automatic type push buttons.
b. Tilting speed control by manually adjustable flow control valve.

Optional:

Side core extraction one or two
Top core extraction
MMI (Full function man machine interface)
Die cooling by water / air and Die Temperature scanning at 4 points.
PLC Controlled Automatic Cycle with proportional flow control valve and encoder for programmed control of the tilting speed.

Product	TGD 01	TGD 02	TGD 03
Die Closing Force (at 100 bar)	2.5 Tonnes	5 Tonnes	10 Tonnes
Die Closing Stroke	300 mm	500 mm	750 mm
Daylight	550 mm	750 mm	1000 mm
Platen Size	500 x 350 mm	700 x 500 mm	1000 x 800 mm
Tilting Angle	90^o	90^o	90^o
Lower Core Pull Force (At 100 bar)	2 Tonnes	2.5 Tonnes	6 Tonnes
Lower Core Pull Stroke	150 mm	150 mm	150 mm
Lower Core Pull Fixing	300 x 150 mm	400 x 200 mm	700 x 300 mm
Top / Bottom Ejector / Core Pull Force	2 Tonnes	2.5 Tonnes	5 Tonnes
Top & Bottom Ejector Stroke	100 mm	100 mm	100 mm
Top & Bottom Ejector Fixing Table	150 x 150 mm	200 x 200 mm	400 x 300 mm
Dry Cycle Time	30 Sec.	40 sec	45 Sec.
Power Required	5 H.P	7.5 H.P	12.5 H.P
Over All Dimension (L x W x D) Approx	2500 x 3500 x 750	3000 x 4000 x 900	4000 x 5000 x 1250
Side Core Pull Force (at 100 Bar)	2 Tonnes	2.5 Tonnes	5 Tonnes
Side Core Pull Stroke	150 mm	150 mm	150 mm
Side Core Pull Fixing Platen Size	100 x 200 mm	150 x 250 mm	200 x 400 mm